
Start With the Throw Ratio
The throw ratio tells you how far the projector must sit from the screen to fill it. The formula, given by both BenQ and LG, is throw distance divided by image width. Rearranged, distance equals throw ratio multiplied by image width.
Use the width of the image, not the diagonal that screens are sold by. A 100-inch 16:9 picture is about 87 inches (2.2 metres) wide. At a 1.5:1 throw ratio the projector then needs to be about 3.3 metres away. LG's worked example is similar: a 1.5:1 projector filling an image 2 metres wide sits 3 metres back.
Many projectors have a zoom lens, so the spec lists a range rather than one number. LG gives a 1.2 to 1.6:1 projector filling a 2.13-metre-wide screen as sitting anywhere from about 2.56 to 3.41 metres away. Always check the exact range for the model you are considering.
Short-Throw and Ultra-Short-Throw Models
If your room is not deep enough, look at the throw type rather than shrinking the picture. BenQ's examples show a standard-throw model needing about 8.2 feet (2.5 metres) for a 100-inch image, a short-throw model about 6.6 feet (2 metres), and an ultra-short-throw model under 3.3 feet (1 metre), with its lens aimed upwards at a screen above and behind it.
Choose the Screen Size From Where You Sit
The right picture size depends on viewing distance as much as on the projector. Kaleidescape describes two common guidelines: SMPTE suggests a picture filling about 30 degrees of your view, suited to mixed-use rooms, while THX suggests about 40 degrees for a more cinematic feel. In practice, multiply your viewing distance in inches by 0.65 for the first and 0.835 for the second to get a diagonal size. From 7 feet (84 inches), that gives roughly 55 inches or 70 inches, and a size in between usually works.
A bigger picture also needs more light. Our guide to projector brightness explains how to judge that.
Position the Projector Square to the Screen
A projector that is not centred on the screen produces a trapezoid, a shape wider at one end than the other. This is called keystone distortion. There are two ways to fix it:
- Lens shift – A physical adjustment that moves the lens up, down or sideways within a set range without distorting the picture. BenQ says vertical shift suits a projector centred on the screen but tilted to fill it, while a projector beside a wall or in a corner needs vertical and horizontal correction.
- Digital keystone correction – The projector reshapes the image in software. LG advises keeping the lens centred vertically with the screen and using keystone correction only if needed.
If you can put the projector on the ceiling or on a table directly in line with the screen's centre, distance alone may be all you need to think about. If you cannot centre it, BenQ suggests choosing a model with lens shift or keystone correction.
Measure Your Room Properly
BenQ advises measuring the longest wall-to-wall distance in the room, since the projector will sit where the walls are furthest apart. For an L-shaped or irregular room, use the distance between the two most distant walls. Then compare the throw distance you need with the "image size at distance" figures in the specifications. LG warns that a projector too close gives a small, distorted image, while one too far away gives a dim picture that may overshoot the screen.
Screen Gain and Room Light
Screens have a gain rating, which describes how much light they reflect. LG suggests a gain of 1.0 to 1.3 to help with some room light for images up to about 100 inches. Expert Reviews adds that picture quality depends on focus, alignment, the screen and the lighting in the room, so all four are worth getting right.
Plan for Sound
Built-in projector speakers have often been weak, according to Expert Reviews, which found portable models sound best when they are placed directly in front of the viewer. A soundbar or small speaker set is the usual fix, so allow for a power socket or an audio connection near the seats as well as near the projector.
A Quick Set-Up Order
- Decide the screen size from your seating distance.
- Work out the throw distance from the model's throw ratio and the image width.
- Place the projector, centred if possible, and fix the height with lens shift or the mount.
- Use keystone correction last, and only for what is left.
- Set focus, then plan the speakers and cables.
Not sure a projector is right for the room? Read projector or TV for a small room first.
We may earn a commission when you buy through links on our site. Learn more · How we rank products


